:	Mar 31, 2006

:

The CKP sensor ring must always be discarded and replaced when removed.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Manual models: Remove the flywheel.

.

Automatic models: Remove the flexplate.

.

Release the CKP sensor.   Release the Allen screw.

.

: Care must be taken to avoid damage to the crankshaft. Remove the CKP sensor ring.   Carefully remove the CKP sensor ring.

.

Install the new CKP sensor ring to the special tool.   Wind the special tool nut back to the end of the thread.   Engage the CKP sensor ring to the locating pin.

.

Install the CKP sensor ring to the crankshaft.   Clean the component mating faces.   Align the dowel and install the special tool to the crankshaft.   Tighten the 2 Allen screws.   Tighten the special tool nut, to install the CKP sensor ring to the crankshaft.   Remove the special tool.

.

Install the CKP sensor.   Tighten the Allen screw to 6 Nm (4 lb.ft).

.

Manual models: Install the flywheel.

.

Automatic models: Remove the flexplate.